思科认证考试（ＣＣＮＡ）考试模拟题０１—１９及答案

     

Examples of each of these commands are shown below:

Router_A#sh int e0/0

Ethernet0/0 is up, line protocol is up

Hardware is AmdP2, address is

0010.7b15.bd41

(bia 0010.7b15.bd41)

Internet address is 10.10.10.1/24

MTU 1500 bytes, BW 10000 Kbit,

DLY 1000 usec,

rely 255/255, load 1/255

Encapsulation ARPA, loopback not set,

keepalive set (10 sec)

ARP type: ARPA, ARP Timeout 04:00:00

Last input never, output 00:00:06,

output hang never

Last clearing of "show interface"

counters never

Queueing strategy: fifo

Output queue 0/40, 0 drops;

input queue 0/75,

0 drops

5 minute input rate 0 bits/sec,

0 packets/sec

5 minute output rate 0 bits/sec,

0 packets/sec

0 packets input, 0 bytes,

0 no buffer

Received 0 broadcasts, 0 runts,

0 giants,

0 throttles, 0 input errors, 0 CRC,

0 frame, 0 overrun, 0 ignored,

0 abort

0 input packets with dribble

condition detected

127 packets output, 11802 bytes,

0 underruns

0 output errors, 0 collisions,

2 interface resets

0 babbles, 0 late collision,

0 deferred

0 lost carrier, 0 no carrier

0 output buffer failures, 0 output

buffers swapped out
Router_A#sh ip int e0/0

Ethernet0/0 is up, line protocol is up

Internet address is 10.10.10.1/24

Broadcast address is 255.255.255.255

Address determined by

non-volatile memory

MTU is 1500 bytes

Helper address is not set

Directed broadcast forwarding is enabled

Outgoing access list is not set

Inbound access list is not set

Proxy ARP is enabled

Security level is default

Split horizon is enabled

ICMP redirects are always sent

ICMP unreachables are always sent

ICMP mask replies are never sent

IP fast switching is enabled